Making a LB KG/如何製作LB KG Part 3

Continue with last time, and this time is a easy one if you have every pieces ready.
繼續昨天的，如果你所有零件都準備好，這次將會很容易的。













Put the cap on the J08 like the next photo
把Cap放在J08上，就像下張圖般



























Next, put the bear feet(B06 with J01 in it) on the mid blox at both sides.
跟著，把熊掌(裝好J01的B06)在中間的那個blox上。
(2邊都裝)












and then, the custom Gojulas' parts from last time. Put it on the back roll of the mid Blox.
跟著到上次改造好的Gojulas零件，放在後方中間的那個Blox上(也是2邊都裝)












Now, put the bear neck(A5, A6) on, and I just fill the hole with putty
跟著裝上熊的頸(A5和A6)，怪獸有把那洞用畢地/補土填掉。













After that, put these parts(B2 with C3 and B3 with C4) at both side on the small blox
跟著把那2組零件(B2+C3和B3+C4)方在小blox的2邊上












Next, the back fins, put where you want
跟著把背鰭放在喜歡的地方













After those parts, should something like this
跟著，應該就像圖中一樣般













Next, put A7 from Brave Jaguar on the bottom blox and B5 from Gojulas on the Gojulas' blox.
接著，把Brave Jaguar的A7放在下方的blox和Gojulas的B5放在Gojulas的blox上
(要自己組裝的那個)













It should look something like this
應該會像這樣子













Second last step, put the customized Hound Soldier piece on the chess.
(in the middle of the piece, there has a big hole, just put on and make sure the cap go inside it)
差不多完了，把改造好的Hound Soldier零件放上胸口。
(Hound Soldier零件的中間有一個洞，確保cap有進去那洞裡)













Last step, put A6 from Brave Jaguar with J12 on it, and put it on A7.
最後，把Brave Jaguar的A6+J12放在Brave Jaguar的A7上。













After you done, is start to getting close to my LB KG.
完成後，會開始像怪獸的LB KG

Something important again/又是一些重要的事

Ok, some confuses has come up, and I want to explain clearly about these confuse.
好了，有些誤會出現了，怪獸想在始解釋清楚這些誤會。

1. I know people may think that this blog is opened by Character Box, but Character Box is only our sponsor. We don't belongs to Character Box and we don't have any store.
1. 怪獸知道，一些人會誤會這是Character Box的blog，但Character Box只是我們的讚助商，我們不是屬於Character Box或者擁有任何店舖。

2. Yes, 1 of my friend is helping out in Character Box on almost every Saturday. And he is the one help me out to create this blog. However, the blog not belong to him, he mainly helping for connect with our sponsor(Character Box for now)。 Also we build/custom models together, So some of the Zoids/models appear in Character Box, that very possible to appear in the blog too.
(since we live close to each other, we can always share some of our stuff)
2. 無錯，怪獸有一位友人在Character Box裡幫忙。他也是幫怪獸製作這個Blog的人。不過擁有者不是他，他主要是幫忙聯絡我們的讚助商(暫時是Character Box)。還有，我們會一起製作/改造模型，所以有些在Character Box出現的Zoids/模型，好可能也會在這個Blog裡出現。
(反正我們住得近，可以經常分享我們的東西)

3. I and my friend like Zoids a lot and don't like much about Gundam Seed and Gundam Seed Destiny. However, we mainly hate what Bandai did on the toys/models and what the director of Seed/Seed D done in the anime. Also those only my/our opinions, not our sponsor's opinion.
3. 怪獸和朋有喜歡Zoids和不怎樣喜歡Seed和Seed Destiny。但主要是我們討嚴Bandai的在模型/玩具產品上的作法和Seed/Seed D那監督在動畫裡的所作所為。還有，這些全是怪獸/怪獸和朋友的看法，不是讚助商的看法。

Making a LB KG/如何製作LB KG Part 2

Now, we are go to build a body-
這次到身體-


You need-
你需要-

Neo Blox
2 Large blox, 3 Medium blox and 1 small blox

NBZ-001 Brave Jaguar
A6, A7, B2, B3, C3 and C4

NBZ-002 Hard Bear
A5, A6, B6 x2 and the tail

LB-003 LB Gojulas MK-II
A5, A6, B5, E4, E5, C-L01 06 and C-L01 07

Hound Soldier Chest piece(3 barrel shock cannon's parts), Missile pod from Shellkam, some "J" parts and a 5mm size cap
軍人獵犬胸前的零件(3連衝擊炮的那一件)、BZ-006的導彈箱、NBZ那些J零件和一個5mm Cap














First, you need all the Neo Blox ready and connect them together just like the next photo.
首先，準備所有Neo Blox和像下一張圖般連結。













Now, get some J08 ready to connect these Neo Blox together.(Just follow the picture to locate all the J08)
跟著，準備J08去把2組Blox連結(跟著圖片的位址裝上)













After you done, you should have something like this.
當你完成後，應該就像這圖般。













Next, ready the Gojulas' blox that you have to build by yourself, the neck from Gojulas and the Bear's tail, then connect them to the blox just like the photo.
再來，準備Gojulas那個要自己組合的Blox、Gojulas的頸和熊的尾部。然後就像圖片般連結。













It should be something like the photo show
應該會像圖片顯示般。

Next few steps is those pieces that need to be custom-
跟著就是需要改造的零件-














Get the E4 and E5 from Gojulas MK-II, E4 need to cut the peg off the piece(just like the circle show). Then, put the J06 in the hole and glue it on.
拿出Gojulas MK-II的E4和E5，E4要把那連結用的5mm棒剪掉，再在後放的大洞放入J06和固定。
(用超能膠/強力膠/速乾膠吧)

Next is the most important parts for the body-
跟著是身體最重要的零件-













Get the Hound Soldier piece ready, and use file, sand paper, etc to grind down a little like the red line show.
(don't need to exactly grind that much, close enough will be fine)
跟著拿軍人獵犬的那件零件，用鋤/鋤刀、砂紙等東西，把下方磨一下。就像圖中的紅線所示般。
(但大約就好，不用一定磨到像紅線顯示般)














Just like the photo, that should be enough.
(little deeper is better)
像圖片般也可以了。
(磨深一點會再好些)













Next, connect the Missile pod from Shellkam to the shock cannon. Where to put and how to put is your choice.
跟著就是把BZ-006的導彈箱弄上去。但放那裡和怎樣放，各位喜歡就行了。













I put it to a place that enough to cover the hole on both size of the shock cannon and use super glue to hold it. That is what the piece looks like.
怪獸放在一過剛好把衝擊炮的那個洞蓋掉的地方。跟著用超能膠/強力膠/速乾膠固定。然後那就會像圖片所示般。

Ok, it will be too much if I do it all at once, I will continue at tomorrow.
(If everything ok....)
好了，今天先這樣。不要一次放太多。明天繼續。
(如果沒有問題的話....)

New items from Character Box/ Character Box的新東西 3

Yes, new items againg, but this time are some re-issue SD models
無錯，又有新東西，但這次是再版SD模型

New items from Character Box/ Character Box的新東西 2

Another new stuff update for Character Box, and again, they are all gachapon.

Comming soon 002

Man....Bandai want to take all our money in the up coming few months....
這個....笨呆想在接著的數個月裡拿掉各位的所有資金....

They just have news for some new and up coming models for HG 00, HGUC and mostly MG.
他們公佈了一堆準備推出的新東西，有HG 00、HGUC和主要的MG。

And many of them is great/must buy stuff....
好多還是好東西/必買的東西....































top: Gundam 00 series(1/100 and 1/144)upcoming new stuffs
上：Gundam 00系列(1/100和1/144)即將推出的新東西
mid: Most shocking one- MG Shin Musha Gundam(Jun 2008)
中：最衝擊的一隻- MG真武者頑太無
lower: only thing can totally ignore = MG Force Impulse Gundam(May 2008)
下：唯一能完全無視的= MG賣荵













God....another KOTOBUKIYA Command Wolf....
天啊....又一隻壽屋指揮狼....
and some new Super Robot War stuff
和一些新的超級機械人大展的東西
and other shocking news, after Gundam Astraea, Bandai will release Gundam Avalanche Exia in 1/100 scale
另一個衝擊的消息，續正義之女神後，笨呆又推出1/100 Exia雪崩裝備。














The Drawing/design for MG Force Impulse
MG賣荵的設計圖

New Bandai show

Bandai has a new show about their chogokin and firgure toy. The name is- 魂ネイション2008.
笨呆又有新的展示會，叫-魂ネイション2008。

This show mainly about chogokin (old, new and original), SIC (some new items) and Saint Seiya(with the up coming God Cloth).
這次展覽會主要是超合金(新、舊和原創)、SIC系列(新產品)和聖衣神話(包括神聖衣)

For more details and pictures, please visit へたれClimax F
更多詳情和圖片，請前往へたれClimax F觀覽
Address= http://www.geocities.jp/climax_f/

If you can't find it, here is the link for the topic-
如果找不到，就按這連結進去-
http://www.geocities.jp/climax_f/T2008.html

PS. All pictures and details are all belong to へたれClimax F.

New items from Character Box/ Character Box的新東西 1

Finally, Character Box has new Gashapon arrive, and this time, is not 1-2, is a lot. Until today(Mar 15th), open more than 14 set, but still have a lot of set not been open yet.
Character Box終於有扭蛋/轉蛋系列到貨，而且這次不是只得1-2套的那種。直到今天為止(三月15號)，開了超過15套扭蛋/轉蛋，但還有很多未開。

Now, here is the part 1 for the new Gashapon series-
現在的是第一批新扭蛋/轉蛋-































































































































































































Sorry, but I don't any time and energy to describe each of them.... please forgive me....
對不起，但沒有時間和精神去逐一价紹....請原諒怪獸吧....